I have about 320 pounds of X-ray film. Do you pay per individual X-ray or per pound? From Jim in Chester, Virginia

Hi Jim,

Because we refine X-ray film by the truckload it would be nearly impossible to keep an accurate count of individual X-rays. The amount of silver in one X-ray is negligible. We pay per pound of X-ray film because it is more accurate and easier for us to track.

The amount returned can add up if you have large quantities of X-ray film, especially when silver is trading for more than $18 per troy ounce. You will need to send at least 300-400 pounds of X-ray film, removed from the paper jackets, to receive a payment and recover the shipping cost. We would recommend filling one or two 50 gallon drums of X-ray film and then shipping the film in the drums.

Please let us know if you have any more questions and don’t hesitate to give us a call. Thanks!

I have sterling silver sheets, wire, and scrap from when I took a jewelry class in the early 1990s. It’s approximately 13.5 standard ounces. What is this worth melted down? From Deanna in Destin, Florida

Hi Deanna,

Silver used in jewelry making such as wire, sheet and clasps is typically 925 sterling silver so it probably contains 92.5% silver.  Unfortunately, components and scraps are often not marked so we would need to run analytical tests to determine the exact percentage of silver in your items.   For evaluation purposes, let’s assume all of the material is sterling silver.

Given this, you can use our silver value calculator, plug in the market price of silver, and calculate its value.   *Today the price of silver is $18.35 USD per troy ounce. Note that standard ounces or avoirdupois ounces are different than troy ounces (1 troy ounce = 1.09714 avoirdupois ounces). Below is a screenshot of the calculator showing the steps you would go through to find the market value of 13.5 avoirdupois ounces of 925 silver.

Based on these figures, the market value of your silver is $208.85.  Of course, the calculated value provides market indications of what your silver is worth if it were in an investment grade form.   As a refiner, we will need to refine the silver, put it into sellable form, and execute the transaction with a buyer.  As such, we typically pay 75% of 925 sterling silver value by weight.

Note: The price of silver changes daily. The given price may not reflect the current price of silver.

I am a jewelry retailer and have about 20+ pounds of outdated styles of sterling silver jewelry that I would like to melt and sell for cash. Can you handle this quantity? Thanks! From Jack in Providence, Rhode Island

Hi Jack,

As one of the largest silver refineries in the United States, we have the capacity to handle truckloads full of material, so 20 pounds will not be an issue. We work with many jewelers who are clearing out tarnished silver and outdated styles to make room for new merchandise. Along with high returns, we send out fast payments, usually within 1 – 2 business days after receiving the material. With that large quantity we can pay you for 80% of the silver value, for less than 20 lbs we will pay 75% of the silver value.

Hope this information helps!

Hi I have 6 silver bars weighing a total of 743.69 ounces. I would like an estimate of the value. I would also like to know how and where to sell these bars. Thanks! From Sarah in Mobile, Alabama

Hi Sarah,

Thank you for your question! First off I am going to assume that your weight is in standard ounces and not in troy ounces, because that will effect the price a bit, but not significantly. We can pay you 75% of the bars’ fine silver value by weight. We do pay more for minted bars because they typically contain 99.9% silver and are made by certified manufacturers, but it sounds like yours are not minted or marked with a mint stamp — so they would be rough silver bars.

However, if they are not marked with a silver quality mark we will not know the true concentration of the fine silver they contain until we get your bars into our testing lab. They could be 70% fine silver by weight or less or more.

I recommend that you insure your shipment of silver bars assuming that your bars for an amount you are comfortable with. We recommend using US Postal Service’s flat rate shipping boxes. Also, make sure that you choose the “Delivery Signature Required” option at the post office.

Hope this information helps!

I have about 13 pounds of Anchor Hocking brand silver cookware and serving pieces. They are very old, dating back to the early 1900’s or before. Could you please tell me how much these are worth? From Kim in Long Beach, Florida

Hi Kim,

There are a couple things you should consider before sending your items in to be refined. The first thing is to make sure that your items are in fact sterling silver and not stainless steel or some other non-precious metal. The easiest way to do this is to look over your items to see if they are marked in someway with an 800, 900, or 925. If you do see these markings, then they are sterling silver and we could pay you for 75% of their fine silver value by weight.

It gets a little trickier if your items are not marked. When you say that you have “silver cookware,” if you are referring to pots and pans then it is unlikely that these are sterling, unless they were used as decorative pieces. Sterling silver serving pieces like gravy boats, trays and pitchers are common, but pots and pans were rarely made from silver.

Here are some markings indicating silver PLATED items:

• EP – electroplated means silver plated
• EPNS – electroplated nickel silver (ironic because there is not silver in nickel silver)

Sometimes you can tell the difference between sterling silver and other metals by the color of your items also. If you can see places where the silver appears to be worn away or flaked off then most likely you have silver plated items. Also if you try to polish your items and black tarnish rubs off, then that is a good indication that you have sterling silver, but not a guarantee.

As a precious metal refiner, we have sophisticated equipment that can test for precious metal content, but please note that we will only be able to return a payment back to you on sterling silver items.

I have about 22 pounds of silver dimes that date before 1964. What is the value of these items please? From Matt in Rochester, New York

I have 277 Washington Quarters and 560 Roosevelt Dimes. What are these worth refined? From Jody in Olympia, Washington

Hi Matt and Jody,

We do buy dimes and quarters with a mint date of 1964 and earlier. We can pay you for 90% of their fine silver value by weight. Contact us for an estimate at current silver prices. Please weigh your silver coins before sending them in and indicate the weight on the packing slip.

Jody – please check and make sure your quarters and dimes are dated 1964 and earlier.

Also, it is important to note that coins that have experience significant wear often have a slight drop in silver weight, around 1-2 percent. We mention this because if you simply take the weight of a freshly minted coin, it will almost always be more than one that has been in circulation for years. Long story short, weigh your coins before sending them in.

We recommend shipping small, heavy items such as silver coins in the US Postal Service’s flat rat shipping boxes. Also request the “Delivery Signature Required” option with your shipment. For list of shipping pricing please refer to a previous blog entry about shipping costs.

I work for a Veterinary Clinic and we are in need of purging old x-rays films. How do we go about getting them recycled? From Sandy in Louisville, Kentucky

Hi Sandy,

The way to go about recycling old x-ray film will really depend on how much you have. For small amounts less than 200 lbs it is not worth paying for transportation and we would recommend taking them somewhere more locally. You could check your local recycling center. However, their conditions vary so you might want to call first to see if they do take X-ray film.

For large amounts we can help you arrange freight, as well as return a payment back to you for the silver content we extract from the x-ray film. If your shipment is worth refining, we would recommend separating the X-ray film from the jackets so you are only transporting the necessary material to the refining facility.

If you can provide a more accurate measure for how much X-ray film you are dealing with, we can give you a more accurate estimate.

I have about 10 pounds of silver based batteries to recycle. What could you pay me for them? – Linda in St. Louis, Missouri

Hi Linda,

We can recover the silver from watch batteries or silver oxide batteries. We pay between $15-$20 per pound. We do not accept co-mingled lots, so you will have to separate these batteries out if they are among other items. If you ever have over 30 pounds of silver batteries, we can usually pay you more.

We recommend using USPS priority mail flat rate boxes with signature required. They are great because you don’t have to worry about high shipping on heavy weight packages.

Hope this information helps!

I have 6.9 lbs. of silver oxide batteries from watches. Can you refine this material? From Michael in Islandton, South Carolina

Hi Michael,

Yes, we do have the capabilities to extract silver from silver oxide batteries. Not only can we return a profit to you for the silver, but we also recycle the other potentially environmental harmful materials contained in silver oxide batteries. We can pay between $15-$20 per pound for the silver bearing material.

For those of you that don’t know, silver oxide batteries are often referred to as silver zinc, watch batteries or button cell batteries. These are regularly used in products such as, hearing aids, watches, cameras and calculators.

Learn more about our silver oxide battery recycling program on our website.

I have some 10lbs of electrical contacts, some of which are 1inch square X1/8 inch thick. Are these worth refining? From Jesse in Springfield, Missouri

Hi Jesse,

We would offer between $10-$15 per pound of silver-bearing electrical contacts depending on the quality and silver content. Keep in mind that the amount of silver in electrical contacts can vary and we won’t be able to determine an exact amount until they are at our facility, tested and refined.

If they do contain a significant amount of silver, then they would be worth it to send to a silver refiner like Arch Enterprises.

I have approx. 5 pounds of “silver flake” extracted from scrap x-ray film 15 years ago. I’m not certain of the purity. I used to sell it to a buyer in the Reno area. Do you have a buyer in the Las Vegas area? – From Jay

We do not have a buyer in the Las Vegas area, but we have people ship silver to us from around the US every day. If you send it to us we can pay you much quicker than a remote buyer or broker since we are the refiner. Please let us know if you would like to send it in, I can obtain an estimate for you. We will be able to pay you 75-85 percent of the silver value for the silver flake.

Because about one-fifth of the world’s silver is used in x-ray film, recycling these items is optimal for the environment. All the silver that Arch Enterprises refines is sold directly back into industries that utilize silver such as the medical industry, photography industry, jewelry industry and more.

I have 7.7 silver from developing negatives in printing, how much would this bring if I took it to refine? – Trisha in Pittsburg, KS

Hi Trisha,

If am not sure if your silver is from a silver recovery unit and is in pounds or ounces. Let’s assume it is silver flake from an electrolytic silver recovery unit, in this case it may be very rich in silver content by weight. We can refine it and return 75%-90% of the silver value back to you via check depending on the actual quantity and quality. If you would like us to test a sample please let us know.

I have some old silver coins that I would like to sell.  What is the best way to go about this? — Amber in Pensacola, FL

If you are looking into selling silver or gold coins, the first step to consider is whether or not your coins have numismatic value. Coins with numismatic value are those that are worth more than their precious metal content. The value of rare coins is determined by four criteria:

1. Rarity
2. Quality
3. Grade
4. Popularity

For these types of coins, we recommend working with a rare coin dealer as you don’t want to sell them for their melt value.

Other silver coins are commonly referred to as “junk silver.” These coins have no value beyond their silver content. In the United States, most silver coins minted before 1964 have a fair amount of silver content and have value based on this precious metal content.

Here are a few examples of the most common junk silver coins we at Arch see.

• (1942-1945) Silver War Nickel
• (1916-1945) Mercury Dime
• (1946-1964) Roosevelt Dime
• (1932-1964) Washington Quarter
• (1916-1947) Liberty Half Dollar
• (1948-1963) Franklin Half Dollar
• (1964) Kennedy Half Dollar
• (1965-1970) Kennedy Half Dollar
• (1878-1921) Morgan Dollar
• (1921-1935) Peace Dollar
• (1971-1976) Eisenhower Dollar
• 1920-1967 Canadian Dime
• 1920-1967 Canadian Quarter
• 1920-1967 Canadian Half Dollar
• 1935-1967 Canadian Dollar

Is there an easy way to tell what grade a silver item is? — Austin in Naperville, IL

The easiest way without testing equipment or chemicals is to look for hallmarks that indicate whether an item is sterling silver.

You may notice small markings on items, usually found in the inside of rings, on clasps of necklaces or on the back of plates. These markings are called hallmarks and can indicate what type of metal you have and how much it may be worth. They are often extremely small so you may need a magnifying glass to read them.  As long as you bought the item from a reputable source, they tend to be very accurate.

Sterling silver items are called Sterling, Sterling Silver or Solid Silver and they are typically marked with 925, 925/1000, 92.5 or .925. The abbreviation SS is also commonly seen for sterling silver. These markings reveal that the item is made from 925 parts out of 1000 of fine silver, the minimum allowable quality for an item to be considered sterling. It is the law that the name or U.S. registered trademark of the company or person is on a quality marked silver item.  We will often ask people the brand and make of their silverware so that we can help them determine whether their silver flatware is sterling or plated although our testing equipment ultimately tells us for sure once we get the items into our facility.

For older pieces, silver may come in many more varieties.  800 silver which was 800 parts silver was very common outside of the United States and before the 1900s as were other 750, 825, and 830.

Another common form of silver on older items is 900.  It refers to coin silver which is 90% silver and 10% copper.  It’s composition was dictated by United States FTC guidelines and established in the 1820s for minting silver coinage.  As such, it is often called “coin silver.”

For further information, see video on refining silver flatware.

My husband and I own a jewelry and watch repair store and for years have been saving the spent watch batteries for recycling. We understand there is some silver content in many of these batteries, but mainly we just want to know that they are recycled. What can we do with these? - Gwen in Memphis, TN

Refiner Response - Gwen, it is admirable of you to consider the environment when thinking of how to dispose of these spent watch batteries. Many watch batteries are actually referred to in the industry as “silver oxide batteries” and as the name implies, they contain a small amount of silver. Most precious metal refiners are not going to be too excited about recycling these unless you have hundreds of pounds of them. Since we at Arch Metal Refining process so much silver, we are able to pay out approximately $10 to $15 per pound depending on the quality and quantity of batteries you have to refine. Obviously, the primary benefit is knowing that these batteries are being recycled and disposed of properly, but the fact that you can make a little money on them can be an added bonus.